STEP SYSTEMS SWM 5000 - Keypad; Key on; off; Key MODE

SWM 5000
11
3.2. Keypad
3.2.1. Key ON / OFF
With ON / OFF the meter is switched
on. Upon prolonged pressing, the
greeting is shown for a corresponding
length of time, e.g. to read the
information without haste.
The measuring instrument can be
switched off again at any time with the
same key, e.g. to stop a setting
initiated with MODE. This feature is
disabled only during the measurement
or when transferring data to the
smartphone via Bluetooth.
3.2.2. Key MODE (-)
With MODE various setting and adjustment functions are selected. When
the desired mode is displayed, it can be selected with SELECT for further
adjustment. When setting date, time, contrast, language, this key is used
to gradually decrease the value to be set.
MODE 1: ADJUST OFFSET
Correction mode for a possibly small zero offset when measured in air
(0%). The process can be carried out as often as desired.
1. Select with SELECT or continue with MODE 2
2. As instructed, hold the probe in the air and start with OK
3. Afterwards the instrument returns to the waiting position
4. The process can be carried out as often as desired