SWM 5000
15
3. The instrument returns to the standby position and displays now
all menus in the language selected
3.2.3. Key OK
With OK, a measuring process is started, regardless of whether the data
logger was set to "manually” or “automat." (see MODE 3).
With the "manual” setting, the measurement result remains in the display
for reading until OK is pressed again. Then the value is stored in the data
logger.
Likewise, the values set or offered via MODE are confirmed and saved
until a new setting is made.
3.2.4. Key SELECT (+)
With SELECT the user can select the currently offered mode for further
setting of the instrument.
For date, time, contrast and language settings, this key is used to
gradually increase the value to be set.
3.2.5. Bluetooth-LED
The white LED in the middle of the 4 keys flashes at intervals of 2s, as
long as there is no Bluetooth connection with the cell phone. It does not
flash when connected (connection is established via the "SWM
Companion" app).
To Next Page
Loading...