Connection to the central gas supply
If the device is not operated with an oxygen
source, it must be connected to the CGS.
Connect the O
2
hose to the O
2
connector on the
left side of the EVE and to the CGS wall outlet.
Connection to a low pressure
oxygen concentrator
When using oxygen with a concentration of
93% an adapter must be screwed on to EVE‘s
oxygen inlet and the „LPO“ option must be
activated.
Preparation for use
„LPO“ adapter,
Art.-No. 107061187
The input flow must be at least
3 l/min. The Fio
2
setting on the
device is deactivated.
The oxygen concentration must be
set on the concentrator.
To Next Page
Loading...
