What to do if Stephan Medical Equipment shows 'O SENSOR FAIL 2'?
If your Stephan Medical Equipment displays 'O SENSOR FAIL 2', it could be due to a faulty calibration where the measured sensor voltage is outside the measurable range. Try to calibrate the sensor. You can also check the connection lead or consider that the sensor may be depleted.
How to fix 'CALIBRATION O 2' error on Stephan Medical Equipment?
If you're encountering a 'CALIBRATION O 2' error on your Stephan Medical Equipment, it might be due to a faulty calibration. In this case, you can try calibrating the sensor. Alternatively, consider replacing the sensor.
What to do if Stephan Medical Equipment shows a TEMP.SENSOR error?
If your Stephan Medical Equipment is showing a TEMP.SENSOR error, it could mean the measured temperature close to the patient is outside the measurable range. You should check the temperature sensor and the sensor cable. If problems persist, consider replacing the temperature sensor.
Explains the manual's role in troubleshooting and highlights essential service procedures.
Details device name, manufacturer, and semi-annual maintenance requirements.
Defines key terms and explains safety symbols used in the service manual.
Describes front housing removal, basic housing, and service flap access.
Introduces electronic controls, power supply, gas supply, reservoir, patient part, and tube systems.
Covers sensor board, controller board, and PDU functions for system operation.
Explains power management, battery backup, and voltage conversion.
Details oxygen and compressed air supply, flow control, and reservoir.
Covers patient part elements like valves, humidifier, and tube systems.
Explains serial interface setup, commands, and data output.
Details procedures for setting and querying device date, time, and calibration values.
Lists essential tools, specialized equipment, and lubricants for maintenance.
Covers daily, weekly, semi-annual checks, safety protocols, and test reporting.
Provides solutions for oxygen sensor and temperature sensor related alarms.
Presents illustrations of complete modules and the pneumatic system schematic.
Lists all figures and tables referenced within the service manual.
Provides space for users to record additional information or observations.
General| Brand | Stephan |
|---|---|
| Model | Alia |
| Category | Medical Equipment |
| Language | English |
To Next Page
