EasyManua.ls Logo

Stephill SSD6000 - Specification; General Safety; Warning Signs; Safety Hazards

Stephill SSD6000
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 6 1 15/06/2015
1 Specification
SE6000D4
SSD6000
kVA
6.0
6.0
kW
4.8
4.8
LWA
96
91
dBA@7M
71
66
Engine
Yanmar L100
Yanmar L100
Alternator
NSM M100 SG
NSM M100 SG
Voltage
230v &115v CTE
230v &115v CTE
Weight
174Kg
196Kg
Length
1220mm
1290mm
Width
710mm
785mm
Height
910mm
890mm
Fuel
24L
24L
Hours run 100% load
13
13
Hours run 75% load
17
17
2 General Safety
2.1 Warning signs
Warnings shown on the machine should be observed at all times. The warning signs
should be checked for legibility and any that have become damaged should be replaced.
The following are shown on the generator:
2.2 Safety hazards
Do not climb on the generator, as dents may cause overheating of the acoustic lining. It is
important to keep the generator clean and well serviced, in particular keep all air vents /
louvers clear of debris to prevent poor performance or possible overheating and
permanent damage to the generator.
Keep well clear of moving parts on the generator at all times.
Children and pets must be kept clear of the operating area.
3 Potential Hazards
3.1 Auxiliary power
The electricity produced by an engine driven Generator is very similar to mains electricity
and should be treated accordingly.
Do not remove covers and attempt to work on the Generator while the engine is running.
Check the rating and electrical safety of the load before connecting the Generator.
CAUTION
HOT EXHAUST
RISK OF ELECTRIC SHOCK
ALWAYS TURN OFF GENERATOR
BEFORE OPENING. KEEP
CLOSED AT ALL OTHER TIMES
BEFORE STARTING.
READ HANDBOOK AND SAFETY ADVICE
CHECK OIL LEVEL
DO NOT ADJUST ENGINE SPEED
WITHOUT SUITABLE TEST EQUIPMENT
WARNING

Other manuals for Stephill SSD6000

Related product manuals