BLD-510B BLDC
B
r
u
s
h
l
e
ss
Driver
2.3 Mechanical Specification
(Unit: mm [1inch=25.4mm])
Dimension: 118x75.5x34mm
2.4 Safety Precautions
Do not measure or touch any components without housing while operating
This product is powered by a DC power supply.
Please confirm that the positive and negative poles of the power supply are correct before powering on.
Do not plug or unplug the connecting cable when the power is on, and no short-circuiting of the cable is allowed when
the power is on, otherwise the product will be damaged.
Should check soleplate or change fuse 1minter later after power off.
Operating without housing is forbidden
Make sure to connect the ground terminal, otherwise the brushless motor will work unsteadily
If the motor needs to change direction while it is running, it must first decelerate till stop, and then change direction.
The driver is a power device and it is important to maintain good heat dissipation and ventilation in the working
environment.
Sudden damage while drives working, our company only renders the service and replace in guarantee. Personal injury
and motor damage caused by the accident will invalidate the guarantee
This product is professional electrical equipment and should be installed, debugged, operated and maintained by
professional and technical personnel. Improper use will cause electric shock, fire, explosion and other dangers.
To Next Page
Loading...
