What to do if StepperOnline DC Drives write data over-limit value?
If you are writing data that exceeds acceptable limits for StepperOnline DC Drives, ensure that the data being written is within the correct and acceptable range.
Why StepperOnline CL57RS show wrong CRC check code?
A wrong CRC check code in StepperOnline DC Drives indicates an error in data transmission or calculation. To resolve this, recalculate the CRC check code for the message.
What to do if StepperOnline CL57RS show wrong access address?
If StepperOnline DC Drives displays a wrong access address, check the access address used and verify it against the expected values.
How to fix wrong FC in StepperOnline CL57RS DC Drives?
To fix a wrong FC (Function Code) error in StepperOnline DC Drives, refer to communication error codes and ensure the function code is valid. This system supports FC beside of 03h/ 06h/ 10h.
General| Brand | StepperOnline |
|---|---|
| Model | CL57RS |
| Category | DC Drives |
| Language | English |
Important safety warnings and general precautions for operating the drive.
Key electrical, operational, and environmental specifications of the drive.
Details on communication settings and supported Modbus function codes.
Query and response formats for reading registers.
Practical examples of reading register values.
Format for writing single register values.
Examples of writing values to registers.
Format for writing multiple register values.
Example for configuring input ports.
Detailed explanation of basic Modbus and PR parameters.
Analysis and troubleshooting of communication and drive errors.
Table of error codes, their causes, and troubleshooting steps.
Methods for enabling the drive and key features of PR mode.
Setting up PR paths and understanding the homing process.
Setting and using soft limits and JOG functions.
Introduction to the STEPPERONLINE MotionStudio software.
Using MotionStudio to set basic drive parameters.
Navigating and managing parameters in MotionStudio.
Performing motor trial runs using the software.
To Next Page
