ENGLISH
ENGLISH-38
To add or modify a MAC Address Filtering entry, follow these
instructions:
1. Enter the appropriate MAC Address into the MAC Address fi eld. The
format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any
hexadecimal digit). For example: 00-0A-EB-B0-00-0B.
2. Enter a simple description of the wireless station in the Description
fi eld. For example: Wireless station A.
3. Privilege - Selects the privileges for this entry, one of Allow / Deny /
64-bit / 128-bit / 152-bit.
4. WEP Key - If you select 64-bit, 128-bit or 152-bit in the Privilege fi eld,
enter any combination of hexadecimal digits (0-9, a-f, A-F) in the
specifi ed length. For example: 2F34D20BE2.
5. Status - Select Enabled or Disabled for this entry on the Status
pull-down list.
6. Click the Save button to save this entry.
To add additional entries, repeat steps 1-6.
When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be
enabled.
To modify or delete an existing entry:
1. Click the Edit or Delete button in the Modify column in the MAC
Address Filtering Table.
2. Enter the value as desired in the Add or Modify Wireless MAC
Address Filtering entry page, and click the Save button.
hen 64-bit, or 128-bit, or 152-bit is selected, WEP Ke
will be
nabled
To Next Page
Loading...
