ENGLISH
ENGLISH-44
DHCP Server - Enable or Disable the DHCP server. If you
disable the Server, you must have another DHCP server within
your network or else you must manually confi gure the
computer.
Start IP Address - This fi eld specifi es the fi rst of the addresses
in the IP address pool. 192.168.1.100 is the default start
address.
End IP Address - This fi eld specifi es the last of the addresses
in the IP address pool. 192.168.1.199 is the default end
address.
Address Lease Time - The Address Lease Time is the amount
of time a network user will be allowed connection to the system
with their current dynamic IP Address.
Enter the amount of time, in minutes, the user will be “leased”
this dynamic IP Address. The range of the time is 1 ~ 2880
minutes. The default value is 120 minutes.
Default Gateway - (Optional.) Suggest to input the IP address
of the LAN port of the AP, default value is 192.168.1.1
Default Domain - (Optional.) Input the domain name of your
network.
Primary DNS - (Optional.) Input the DNS IP address provided
by your ISP. Or consult your ISP.
To Next Page
Loading...
