The function lets the RM-110 to learn functions from the original remote control to control your
equipment. Learning will not work if the RM-110 is not previously confi gured to a device with
a valid code.
1. Press and hold the button on the unit (TV, DVD, etc.) which you want to program until the
indicator on the button is activated.
5. When the desired command has been learned, press once LRN to fi nish.
All keys can be used to transfer functions from other remote controls, except the LRN, team
buttons key (TV, DVD, etc.) and favorite.
4. Once the LED blinks, align the infrared sensors of the
two controls (RM-110 and the original) at a 1 to 3 inches
distance. On the original remote control, press the function
key to be transferred (e.g., light). Once the indicator blinks
off, the information will be copied correctly.
2. Press the LRN button.
3. In the RM-110: press and release the key that you
want to learn (e.g., light).
To Next Page
