Stermay M1 - Install the Sport Camera on the M1

7.2 Install the sport camear on the M1
1.Make the Camera Bracket align to the Track of Main Unit,and
slide the Camera Bracket into the Main Unit until the screw
holes of both are aligned.
2.Rotate the Bolt 1 on the Camera Bracket and fasten it to the
Main Unit.
3. Insert the installation components of underwater sport
camera(Not Provided) into the corresponding groove of
Camera Bracket ,then use the Bolt 2 insert into Camera
Bracket and fasten it.
Bolt 1
1
Track
Camera Bracket
2
3
Bolt 2
Underwater Sport
Camera (Not Provided)
STERMAY
15