170
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
NOTE: Avoid stopping and restarting frequently as the cutting line will be extended unnecessarily
each time, resulting in line waste.
2. Manual line extension: Pull out the cutting line while pressing the line feed button on the
spool housing.
WARNING: Before adjustment, disconnect the plug from the main supply to avoid accidental
start.
NOTE: The grass around power head must be clean up as it may clog the spool in turn aecting
normal line feed.
4. TRANSPORTATION
Transporting the machine may require that you meet certain requirements specific to your
country. Please make sure to respect them by contacting the authorities of your country, in
order to respect them all.
Pull the power plug from the socket. Let the machine cool for 2 hours outside before transport
it. Ensure temperature during transportation will never be out of temperature range given on
chapter storage. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles. Secure the product to prevent it from slipping or falling
over.
5. WINTERING & STORAGE
5.1 STORE THE MACHINE
Store the product : illustration
6.1
Pull the power plug from the socket. Be sure to secure the unit while transporting. Examine the
unit thoroughly for worn, loose or damaged parts. Clean the product before storing.
Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to
24°C. Cover it in order to provide added protection. Do not expose the product to sunlight. Make
sure the product is always protected from cold and humidity. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it
against dust.
To Next Page
Loading...
