171
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
6. MAINTENANCE
6.1 CLEANING
WARNING ! DO NOT HANDLE CUTTING PARTS WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER USE,
POTENTIALLY CAUSING PERSONAL INJURY.
Cleaning the product : illustration
5.1
Pull the power plug from the socket. Let the machine cool for 2 hours outside before cleaning it.
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the
product with a cloth. It is highly suggested that you clean the device after every use. Do not
use cleaning agents, as these can attack the plastic and weaken the structural integrity of the
product.
6.2 MAINTENANCE SCHEDULE
Part Action Before/After each usage
SPOOL LINE
CHECK
ವ
CHANGE
WHEN IT'S NECESSARY / REFER TO
TROUBLE SHOOTING
FILL THE SPOOL
WHEN IT'S NECESSARY / REFER TO
TROUBLE SHOOTING
GUARD PROTECTION
CHECK
ವ
CLEAN
ವ
CHANGE
WHEN IT'S NECESSARY / REFER TO
TROUBLE SHOOTING
POWER CABLE CHECK
ವ
6.3 REPLACEMENT
Replace the spool : illustration
5.2
to
5.5
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
To Next Page
Loading...
