STIEBEL ELTRON CON 100-1 Premium - Product Registration; Warranty Registration; Heater Description; CON Premium Overview

OPERATION
Register your product
www.stiebel-eltron-usa.com CON Premium | 5
ENGLISH
3. Register your product
You must register this product within 90 days of
purchase on our web site in order to activate the
standard warranty or to be eligible for the extended
warranty. Go to our web site at
www.stiebel-eltron-usa.com and click on register
your product.
Before beginning the registration process, we suggest that
you gather the necessary information which will be as
follows:
Type, Example: CON 150-1 Premium (from the white label that
is on the left side of the unit)
Number listed after “No.”
Place of Purchase
Purchase Date
First & Last Name
Email address
Physical Address
Phone Number
If you have any questions concerning the registration process
or warranty options, please contact Stiebel Eltron USA direct-
ly at 800.582.8423.
4. Heater description
CON Premium is a wall mounted electric convection heater.
The heater is suitable for use as a standalone heating system,
or can be used in spring and autumn and as a booster heater in
smaller rooms.
The air inside the heater is heated by a heating element and ex-
pelled via natural convection through the air discharge at the top.
Cool indoor air is drawn in through the air intake on the underside
of the heater.
When the set room temperature is reached, it is maintained by
periodic heating.
5. Operation
D0000074791
2
1
1 Programming unit
2 ON/OFF switch
5.1 Programming unit
The heater is operated using the programming unit, located at
the top right front.
D0000080849
2
1
1 Display
2 User interface
5.1.1 User interface
Button Designation Description
“Standby” button Switches on the programming unit;
Puts programming unit and heater into stand-
by mode
“OK” button Makes selections;
Confirms settings
“Menu” button Calls up and exits menu
“+” button Calls up menu items;
Changes settings
“–” button Calls up menu items;
Changes settings
5.1.2 Display
If there is no user input for 20seconds, the backlight switches off.
Press any button to switch the backlight on again.
Symbols
Symbol Description
Time display:
Indicates the current time, or a programmed start time
Time program activated:
Heats in accordance with the enabled time program.
Comfort mode:
The heater maintains the set comfort temperature.
Standard comfort setting: 70 °F (21.0 °C). Use this setting for a
comfortable room temperature when someone is present.
Night mode:
The heater maintains the selected lower nighttime temperature.
Standard setting: 64 °F (18.0 °C). Use this setting at night or when
absent for several hours.