Name: STIEBEL ELTRON DHE 18
Brand: STIEBEL ELTRON
Rating: 4 (1 reviews)

To Next Page

To Previous Page

www.stiebel-eltron.com DHE | 79

INSTALLATION

Installation

ENGLISH

 Pull the cable grommet over the cable sheath of the power

cable. For large cable cross-sections, enlarge the hole in the

cable grommet if necessary.

D0000053274

 Remove the transport protection plugs from the appliance

pipe connections.

 Bend the power cable 45° upwards.

 Route the power cable and cable grommet through the back

panel from the rear.

 Install the appliance on the threaded studs of the wall

mounting bracket.

 Press the back panel ﬁrmly into place, aligning it correctly.

 Lock the ﬁxing toggle by turning it 90° clockwise.

 Pull the cable grommets into the back panel until both lock-

ing tabs engage.

3 Nm

5 Nm

D0000056244

 Fit the pipe connections with ﬂat gaskets onto the water

connections.

 Open the 3-way ball shut-off valve or the shut-off valve in the

cold water inlet line.

Other manuals for STIEBEL ELTRON DHE 18

Questions and Answers:

Need help?

Do you have a question about the STIEBEL ELTRON DHE 18 and is the answer not in the manual?

General