OPERATION
Settings
72 |DHEConnect | DHETouch www.stiebel-eltron.com
Menu structure Description
Connect other wireless subscribers Start wireless setup mode in the instantaneous water heater via the programming unit, to set up the
wireless connection to an external programming unit or a wireless remote control.
Fault Display device faults.
Contractor contact The qualified contractor can store his contact details here for service cases.
Device details Type | Product ID | QR code. The QR code enables fast access to our internet site from a mobile termi-
nal device (smartphone or tablet).
Service code Accessible to qualified contractors only.
4.4 Mini wireless remote control
Using the mini wireless remote control you can adjust the temper-
ature setting wirelessly. Encoding prevents other wireless remote
controls from changing the settings.
Obstacles can affect the transmission path between device and
mini wireless remote control.
You can use the mini wireless remote control while showering
or bathing.
The mini wireless remote control is delivered registered to the
instantaneous water heater.
OFF 3s
38 60
+
_
D0000033105
3
1
2
1 "+" and "-" temperature setting
2 Temperature adjustment 38 and 60°C direct selection
buttons
3 LED
Press a button on the mini wireless remote control. This
transmits data to the device. The red LED confirms that the
key information has been transmitted to the device.
You can switch the appliance heating system to OFF using the
mini wireless remote control. Press and hold the "-" button
for ≥3seconds. Press any key to switch it back on.
To Next Page
Loading...
Need help?
General
