STIEBEL ELTRON HM Trend - Minimum Clearances; Wall Mounting

6 | HM (S)| HM(S) Trend www.stiebel-eltron.com
INSTALLATION
Installation
ASL-HM
D0000041458
9.3 Minimum clearances
HM (S) | HM(S) Trend without ASL-HM
≥150
≥1000
≥70
≥400
D0000041600
 Maintain the minimum clearances to enable maintenance
work on the appliance.
If the appliance is not installed in a recess, we recommend
leaving 400mm clearance on the right-hand side for the
electrical connection.
HM(S) | HM(S) Trend with ASL-HM
≥150
≥1000
≥400
≥70
D0000041599
 Maintain the minimum clearances to enable maintenance
work on the appliance.
If the appliance is not installed in a recess, we recommend leav-
ing 400mm clearance on the right-hand side for the electrical
connection.
9.4 Wall mounting
General
164
D0000042865
 Position the installation template horizontally at the required
installation location. The installation template can be found
in the cardboard box.
 Mark the holes on the wall. Please note that the bottom two
holes are only required in combination with the ASL-HM.
 Drill the holes.
 Insert suitable rawl plugs into the holes.
 Turn the double ended screws into the rawl plugs.
HM(S) | HM(S) Trend without ASL-HM
D0000041461
 Place the appliance onto the double ended screws, followed
by the washers provided. Secure the appliance with the cor-
responding nuts.