2 | PER 18/21/24 www.stiebel-eltron.com
CONTENTS | SPECIAL INFORMATION
SPECIAL INFORMATION
OPERATION
1. General information ������������������������������������������3
1.1 Safety instructions ����������������������������������������������� 3
1.2 Other symbols in this documentation ������������������������ 3
1.3 Units of measurement ������������������������������������������ 3
2. Safety ����������������������������������������������������������3
2.1 Intended use ������������������������������������������������������ 3
2.2 General safety instructions ������������������������������������� 4
2.3 Test symbols ������������������������������������������������������ 4
3. Appliance description ����������������������������������������4
4. Settings �������������������������������������������������������� 5
4.1 Settings and displays on the appliance ���������������������� 5
4.2 Settings in the INFO menu ������������������������������������� 6
4.3 Settings on the wireless remote control ��������������������� 8
4.4 Further functions ��������������������������������������������8
4.5 Recommended settings ����������������������������������������� 8
5. Cleaning, care and maintenance ����������������������������8
6. Troubleshooting ����������������������������������������������9
INSTALLATION
7. Safety �������������������������������������������������������� 10
7.1 General safety instructions ������������������������������������ 10
7.2 Instructions, standards and regulations �������������������� 10
8. Appliance description �������������������������������������� 10
8.1 Standard delivery ����������������������������������������������� 10
9. Preparations ������������������������������������������������ 10
9.1 Installation site �������������������������������������������������� 10
9.2 Water installation ����������������������������������������������� 11
10. Installation �������������������������������������������������� 11
10.1 Standard installation �������������������������������������������11
10.2 Installation options ���������������������������������������������14
10.3 Completing the installation �����������������������������������16
10.4 Installation of wireless remote control ����������������������16
11. Commissioning ��������������������������������������������� 16
11.1 Initial start-up ���������������������������������������������������16
11.2 Recommissioning ����������������������������������������������� 16
12. Shutdown ��������������������������������������������������� 16
13. Troubleshooting �������������������������������������������� 17
13.1 Customer service mode ���������������������������������������� 17
14. Maintenance ������������������������������������������������ 18
15. Specification ������������������������������������������������ 18
15.1 Dimensions and connections ��������������������������������� 18
15.2 Wiring diagrams ������������������������������������������������19
15.3 Factory settings �������������������������������������������������� 19
15.4 DHW output ������������������������������������������������������ 19
15.5 Application areas/ conversion table ������������������������19
15.6 Pressure drop ���������������������������������������������������� 19
15.7 Fault conditions �������������������������������������������������20
15.8 Details on energy consumption ������������������������������20
15.9 Data tables �������������������������������������������������������20
GUARANTEE
ENVIRONMENT AND RECYCLING
SPECIAL
INFORMATION
- The appliance may be used by children aged 8
and up and persons with reduced physical, sen-
sory or mental capabilities or a lack of experience
and know-how, provided that they are supervised
or they have been instructed on how to use the
appliance safely and have understood the result-
ing risks. Children must never play with the ap-
pliance. Children must never clean the appliance
or perform user maintenance unless they are
supervised.
- Risk of scalding: The tap can reach temperatures
in excess of 60°C.
- Ensure the appliance can be separated from the
power supply by an isolator that disconnects all
poles with at least 3mm contact separation.
- Secure the appliance as described in chapter "In-
stallation/ Installation".
- Observe the maximum permissible pressure (see
chapter "Specification/ Data table").
- Drain the appliance as described in chap-
ter "Installation/ Maintenance/ Draining the
appliance".