STIEBEL ELTRON PER 18/21/24 - Settings; Appliance Settings and Displays; INFO Menu and ECO Settings

OPERATION
Settings
www.stiebel-eltron.com PER 18/21/24 | 5
ENGLISH
4. Settings
4.1 Settings and displays on the appliance
26�02�02�0929
Temperature display
Bar graph showing output
Second display
e.g. time
Memory keys 1 and 2
Info and ECO button
ECO display
Temperature selector
Display field for additional information:
Service, error
Backlighting
Display field:
Wellness, automatic water volume control,
childproofing, ECO, second display, clock
Display field
Wellness Second line
Automatic water volume
control
Time
ECO mode Orientation light
Childproofing
Display field for additional information
 Please contact your qualified contractor if the following sym-
bols are displayed:
Error
Service
4.1.1 Setting the temperature
The desired temperature can be variably adjusted by turning the
rotary selector. The set temperature is displayed.
Operation Display
Select a temperature between
30 and 60°C via stepless
setting
e.g. 43°C
OFF = heating switched
off
4.1.2 Memory keys
Using the memory keys, you can quickly call up two preferred
temperatures. These temperatures can be selected by you.
Allocating memory keys
Select the temperature be-
tween 30 and 60°C that you
wish to save
e.g. 38°C.
Press button1 or button2 for
3seconds
e.g. 38°C and 43°C
Display flashes once brief-
ly, temperature is stored
Calling up memory keys
Press button1 or button2 e.g. 38°C and 43°C
4.1.3 Selecting/deselecting ECO
The ECO function is activated and deactivated with the ECO button.
If you have activated the ECO function, a green LED below the
button lights up. The ECO symbol is also displayed.
The ECO function limits the flow rate to the ECO flow rate and sets
a pre-defined ECO temperature. Both values can be adjusted via
the INFO menu.
Note
The ECO function is deactivated each time you adjust the
temperature on the appliance (with the temperature se-
lector or via the memory keys). You must then re-activate
the ECO function if required.
If you have selected the temperature via the wireless remote con-
trol, the ECO function is re-activated automatically after water has
been drawn off.
Press the ECO button:
Selecting ECO
Green LED illumi-
nates.
Press the ECO button:
Deselecting ECO Off
LED is not lit.