1.
2.
3.
4.
5.
7.
NOTE
If the machine is used in
anti-freeze mode at higher temperatures, this may
cause diculties when starting the engine and
during use due to the incorrect engine speed.
Always check that the machine is switched to
normal mode (with the “SUN” symbol facing
upwards) if there is no danger of ice forming.
10 HOW TO START - USE – STOP THE ENGINE / USING THE MACHINE
EN
To respect people and the environment:
– Try not to cause any disturbance.
– Scrupulously comply with local regulations
and provisions for the disposal of waste ma-
terials after sawing.
– Scrupulously comply with local regulations
and provisions for the disposal of oils, pet-
rol, damaged parts or any elements which
have a strong impact on the environment.
– A certain amount of chain lubricating oil is
released into the environment when the ma-
chine is running, so only use biodegradable
oils made specically for this use. Use of a
mineral oil or motor oil causes serious dam-
age to the environment.
WARNING!
Always wear suitable
clothing when using the machine. Your dealer
can provide you with all the information on the
most suitable accident-prevention devices to
guarantee your safety. Wear anti-vibration
gloves. All the above-mentioned precautions
do not however guarantee the prevention of
certain risks – i.e. Raynaud’s phenomenon or
Carpal tunnel syndrome. For operators who
use this machine for prolonged periods, it is
therefore recommended to have periodic
check-ups on the hands and ngers.
If any of the above mentioned symptoms
should appear, please contact a physician
immediately.
DANGER!
This machine’s starter unit
generates an average sized electromagnetic
eld, but it is not however possible to exclude
the possibility of interference on any active or
passive medical devices that operators may
be wearing; this could be risky for their health
conditions. All those using medical devices
should always consult their GP, or the device
manufacturer, before using this machine.
WARNING!
It takes specic training to
use the machine for felling and delimbing.
CHAIN BRAKE
-
WARNING!
Do not use the machine if
the chain brake does not function correctly
and have it inspected by your dealer.
• Check that the chain brake is working
eciently.
7. USING THE MACHINE
To Next Page
Loading...
