14 MAINTENANCE AND STORAGE
EN
• Tuning minimum speed
WARNING!
The chain must not move
when the engine is running idle. If the chain
moves when the engine is running idle, con-
tact your dealer to correctly regulate the en-
gine.
SHARPENING THE CHAIN
WARNING!
To ensure that the chain-
saw works safely and eciently, it is essential
that the cutting components are well-sharp-
ened.
WARNING!
If the chain is not su-
ciently sharpened, the kick-back’s risk in-
creases.
-
-
-
Chain maintenance table
WARNING!
The table gives the sharpening data for dierent types of chains, but this
does not mean you can use chains other than those approved and listed in the “Correct bar
and chain combination table”.
Chain pitch Limiter tooth level (a) File diameter (d)
3/8 Mini
0.325
3/8
0.404
To Next Page
Loading...
