15
Operation
Hours
Completed (Date or Hours)
2. ENGINE
1)
2.1
…
2.2
…
2.3
…
2.4
…
2.5
…
2.6
…
2.7
…
6.3.1 Engine (Fig. 6.2)
-
6.3.2 Rear axle
6.3.3 Battery (Fig. 6.3)
-
-
IMPORTANT Recharging must be done us-
ing a battery charger at constant voltage. Other
recharging systems can irreversibly damage the
battery.
-
IMPORTANT This connector must only be
used for connection to the maintenance battery-
charger indicated by the Manufacturer. For its
use:
– follow the indications given in the relative in-
structions manual;
– follow the instructions in the battery manual.
6.3.4 Greasing (Fig. 6.4)
6.4 INTERVENTIONS ON THE MACHINE
6.4.1 Aligning the cutting-means
assembly (Fig. 6.5)
-
To Next Page
Loading...
