EN
INTRODUCTION 1
Dear Customer,
thank you for choosing one of our products. We hope that you will be completely satisfied with this
machine and that it fully meets your expectations. This manual has been compiled in order to provide
you with all the information you need to get acquainted with the machine and use it safely and effi-
ciently. Don’t forget that it is an integral part of the machine; keep it handy so that it can be consulted
when necessary, and pass it on to a further user if you resell or loan the machine.
Your new machine has been designed and manufactured in pursuance with current regulations, and is
safe and reliable if used in full compliance with the instructions provided in this manual (proper use).
Using the machine in any other way, or non–compliance with the safety specifications relative to use,
maintenance and repair is considered "improper use" which will invalidate the warranty, relieve the
manufacturer from all liabilities, and the user will consequently be liable for all and any damage or injury
to himself or others.
Since we regularly improve our products, you may find slight differences between your machine and
the descriptions contained in this manual. Modifications can be made to the machine without notice
and without the obligation to update the manual, although the essential safety and function charac-
teristics will remain unaltered. In case of any doubts, please contact your dealer. And now enjoy your
work!
TABLE OF CONTENTS
1. Identification of the components .............................................. 2
2. Symbols ..................................................................................... 3
3. Safety requirements .................................................................. 3
4. Prepare the machine ................................................................. 6
5. Preparing to work ...................................................................... 6
6. How to start - Use - Stop the engine ........................................ 8
7. Using the machine ..................................................................... 9
8. Maintenance and storage ........................................................ 10
9. Identification of faults .............................................................. 11
10. Technical specifications ........................................................... 12
WARNING!!!
HEARING DAMAGE RISK
IN NORMAL WORKING CONDITIONS THIS MACHINE
CAN INVOLVE EXPOSURE TO NOISE LEVELS OF 85 DB (A)
OR HIGHER TO ANYONE OPERATING THE MACHINE
To Next Page
Loading...
Need help?
General
