Stihl 029, 039 - 1.4 Cutting Attachment; 1.5 Special Accessories; 1.5.1 For user; 1.5.2 For service shop

STIHL 029, 039 5
1.4 Cutting Attachment
Guide bars: Rollomatic with sprocket nose
Duromatic with stellite-tipped nose
Bar tail: 3003
Bar lengths: (32, 37, 40, 45, 50 and 63 cm)
(13, 15, 16, 18 and 25 in)
Oilomatic chain: 9.32 mm (3/8") Rapid-Micro,
Rapid-Super
8.25 mm (0.325") Rapid-Micro,
Rapid-Super
Chain sprockets: 7-tooth 3/8" spur sprocket
7-tooth 0.325" spur sprocket
7-tooth 0.325" rim sprocket
8-tooth 0.325" rim sprocket
Chain speed: 21.7 m/s (71 ft/s) at 10,000 r.p.m.
Chain lubrication: Fully automatic, speed-controlled
reciprocating oil pump, no feed at
idle speed. Additional manual oil flow
control
Oil feed rate (adjustable): 6-15 cm³/min (0.2 - 0.5 fl.oz/min)
at 10,000 r.p.m.
Oil tank capacity: 0.33 L (0.7 US pt)
1.5 Special Accessories
1.5.1 For user STIHL repair kit 1127 900 5000
Starter rope ∅ 3.5x30.5 m 0000 930 2203
7-tooth 3/8" rim sprocket kit 1125 007 1002
7-tooth 0.325" rim sprocket kit 1125 007 1001
8-tooth 0.325" rim sprocket kit 1125 007 1000
7-tooth 3/8" spur sprocket 1125 640 2000
7-tooth 0.325" spur sprocket 1125 640 2005
Spur gear/tensioning screw kit 1127 007 1003
Elastostart 1128 190 3400
1.5.2 For service shop Carburetor parts kit (Walbro) 1127 007 1060
Carburetor parts kit
(automatic choke) 1127 007 1061