EasyManua.ls Logo

Stihl BR 380 - If the engine is cold; Move the choke knob to and continue cranking until the engine runs.; If the engine is warm; Continue cranking until the engine runs.

Stihl BR 380
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BR 380
English
13
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
When the engine begins to fire:
If the engine is cold:
N Move the choke knob to e and
continue cranking until the engine
runs.
If the engine is warm:
N Continue cranking until the engine
runs.
As soon as the engine runs
N Move setting lever (2) to lower stop
– the engine settles down to idle
speed.
To shut down the engine
N Slide the stop switch (1) to $ .
Other hints on starting
At very low outside temperatures
N Warm up the engine.
As soon as the engine runs:
N Move setting lever to lower stop –
the engine settles down to idle
speed.
N Open throttle slightly – warm up the
engine for a short period.
If the engine does not start
If you did not turn the choke knob to e
quickly enough after the engine began to
fire, the combustion chamber is flooded.
N Pull off the spark plug boot.
N Unscrew and dry off the spark plug.
N Move the stop switch to 0.
N Open the throttle wide.
N Crank the engine several times with
the starter to clear the combustion
chamber.
N Refit the spark plug and connect the
spark plug boot.
N Slide the stop switch to # and set
the choke knob to e – even if the
engine is cold.
N Now start the engine.
373BA013 KN
373BA014 KN
2
1
373BA015 KN
373BA016 KN

Related product manuals