BR 380
English
7
Mounting the Elbow
A combination wrench and carburetor
screwdriver are stowed on the underside
of the blower.
The throttle cable is already connected
and must not be kinked during
assembly.
N Push the elbow (1) into the stub (2)
as far as it will go – the stops on the
elbow and stub must line up.
N Fit the nut (3) in the hexagon recess
in the stub.
N Insert the screw in the nut from the
other side and tighten moderately –
the elbow must still turn.
Assembling the Unit
To Next Page
Loading...
