EasyManua.ls Logo

Stihl BR 380 - Adjusting the Control Handle; Adjusting the Harness Straps; Fuel; The engine requires a mixture of gasoline and engine oil.

Stihl BR 380
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BR 380
English
9
Adjusting the Control Handle
N Put the unit on your back.
N Loosen the clamp screw (11).
N Slide the control handle (10) along
the tube to the most comfortable
position.
N Tighten down the clamp screw (11)
firmly.
Adjusting the Harness Straps
N Pull the ends of the straps
downward to tighten the harness.
Loosening the Harness Straps
N Lift the tabs of the sliding adjusters.
N Adjust the straps so that the
backplate is held firmly and
comfortably against your back.
The engine requires a mixture of
gasoline and engine oil.
Avoid direct skin contact with and
breathing in of gasoline fumes.
STIHL MotoMix
STIHL recommends using STIHL
MotoMix. This pre-blended fuel is free of
benzene and lead, stands out because
of a high octane rating, and always
provides the proper mixing ratio.
STIHL MotoMix is specially engineered
for STIHL engines and guarantees long
engine life.
MotoMix is not available in all markets.
Mixing fuel
Unsuitable fuels or a mixing ratio that
deviates from the specification can lead
to severe engine damage. The engine,
seals, fuel lines and fuel tank may be
damaged if poor quality gasoline or
engine oil is used.
Gasoline
Use only high-quality gasoline with an
octane rating of at least 90 ROC –
leaded or unleaded.
Unleaded gasoline must be used in
machines equipped with a catalytic
converter.
11
10
373BA002 KN
373BA003 KN
373BA004 KN
Fuel

Related product manuals