BR 380
English
14
If fuel tank has been run completely dry 
and then refueled
N Pull the starter rope several times to 
prime the fuel system.
During Operation
After a long period of full throttle 
operation, allow the engine to run for a 
short while at idle speed so that engine 
heat can be dissipated by the flow of 
cooling air. This protects engine-
mounted components (ignition, 
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the 
engine to cool down. Empty the fuel tank 
and keep the machine in a dry place, 
well away from sources of ignition, until 
you need it again. For longer out-of-
service periods – see "Storing the 
Machine".
If there is a noticeable loss of engine 
power
N Turn the choke knob to g.
N Take out the screw (1) and remove 
the filter cover (2).
Operating Instructions Cleaning the Air Filter