Stihl BR 380 - Spark Arresting Screen in Muffler; If the engine is down on power or does not run smoothly at maximum RPM, check the spark arresting screen (not fitted in all versions) in the muffler.; Wait for the engine to cool down completely before performing this work.; Use suitable tool to squeeze ends of clip (1) together and then lift the clip away.

BR 380
English
18
If the engine is down on power or does
not run smoothly at maximum RPM,
check the spark arresting screen (not
fitted in all versions) in the muffler.
Wait for the engine to cool down
completely before performing this work.
N Use suitable tool to squeeze ends of
clip (1) together and then lift the clip
away.
N Pull the spark arresting screen (2)
out of the muffler.
N Clean the spark arresting screen if
necessary.
N If the spark arresting screen is
damaged or heavily carbonized, fit a
new one.
Replacing the starter rope
N Take out the screws (1).
N Remove the starter cover (2) from
the housing.
N Remove the spring clip (3).
N Remove the rope rotor with
washer (4) and pawl (5).
Spark Arresting Screen in
Muffler
373BA031 KN
1
2
Replacing the Starter Rope
and Rewind Spring
1
1
1
373BA025 KN
2
1
353BA034 KN
3
5
4