Stihl FS 240 - Loop Handle Adjustment; Adjusting and Securing the Loop Handle

FS 240, FS 240 R
English
21
N Press throttle cable (14) – if
necessary – into the throttle cable
support (15)
Swiveling the handlebar
Into the transport position
N Loosen the tommy screw (3) and
unscrew it until it is possible to
swivel the handlebar (7) clockwise
N Turn the handle bar 90° and then
swivel it downward
N Tighten tommy screw (3)
Into the working position
N Swivel and turn the handlebar
counterclockwise in the opposite of
the order described above
Using the Barrier Bar
A barrier bar may have to be mounted to
suit the tool you intend to use – see
"Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
14
15
002BA378 KN
15
14
7
002BA379 KN
3
Mounting the Loop Handle
002BA571 KN