0458-838-8601-A
46
English
21 Troubleshooting Guide
► Remove the spark plug boot (3).
► Clean the area around the spark plug with a cloth or soft
brush.
► Unscrew the spark plug (4) and clean it with a cloth.
► If the spark plug is corroded, replace it.
► If the spark plug is damp, dry it thoroughly before re-
inserting it.
► Insert the spark plug and tighten it down firmly.
► Connect the spark plug boot and press it down firmly.
► Place the cap in position.
► Tighten the screw.
21.4 Adjusting the Throttle Cable
NOTICE
It may be necessary to correct the adjustment of the throttle
cable after assembling the machine or after a prolonged
period of operation.
Adjust the throttle cable only when the unit is completely and
properly assembled.
To adjust the throttle cable:
► Fully depress the throttle trigger (1) and hold it in this
position.
► Carefully rotate the screw (2) in the throttle trigger in the
direction of the arrow until you feel initial resistance.
► Rotate the screw another half turn in the same direction.
To Next Page
Loading...
Need help?
General
