FS 410 C K
English
34
Combustion chamber
decarbonize after 139 hours of opera-
tion, subsequently after every 150 hours
of operation
X
All accessible screws, nuts and bolts (not
adjusting screws)
2)
retighten X
Antivibration elements
check
4)
XX
replace
2)
X
Cutting attachment
visual inspection XX
replace X
check for secure fit XX
Metal cutting attachment sharpen XX
Safety information sticker replace X
1)
Only if there is a noticeable loss of engine power
2)
by a servicing dealer, STIHL recommends STIHL servicing dealers
3)
Tighten screws for the muffler after a running time of 10 to 20 hours after first use
4)
See the section "Inspection and maintenance by the servicing dealer", subsection "Antivibration elements"
The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
before starting work
at the end of work and/or
daily
whenever tank is refilled
weekly
monthly
yearly
if faulty
if damaged
as required