Stihl FS 410 C K User Manual

FS 410 C K
English
12
N Move the handlebar to the required
position.
Closing the wing screw
N Turn the wing screw clockwise as
far as stop.
N Fold the grip of the wing screw down
so that it is flush.
Swiveling the handlebar
Transport position
N Loosen the wing screw (7) and
unscrew it until the handlebar (2)
can be turned clockwise.
N Turn the handlebar 90° and then
swing the handles down.
N Tighten down the wing screw (7)
firmly.
Working position
N Reverse the sequence described
above to swing the handles up and
turn the handlebar
counterclockwise.
Correct adjustment of the throttle cable
is a preconditon for correct operation of
the machine in all modes, from starting
to full throttle.
It may be necessary to readjust the
throttle cable after assembling the
machine or after a prolonged period of
operation.
– The throttle cable can checked and
adjusted by the user: see
"Inspection and Maintenance by
User".
– The throttle cable can be checked
and adjusted by your dealer. Have
the machine repaired by your
servicing dealer. STIHL
recommends a STIHL servicing
dealer.
4BA007 KN
4BA005 KN
4BA006 KN
2
7
4BA008 KN
Adjusting the Throttle Cable

Stihl FS 410 C K Specifications

General

Brand	Stihl
Model	FS 410 C K
Category	Trimmer
Language	English