FS 410 C K
English
29
Installing the Rewind Starter
N Position and line up the rewind
starter on the engine.
N Insert the screws (1) and tighten
them down firmly.
For periods of 3 months or longer
N Drain and clean the fuel tank in a
well ventilated area.
N Dispose of fuel properly in
accordance with local
environmental requirements.
N Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N Remove, clean and inspect the
cutting attachment.
N Thoroughly clean the machine.
N Store the machine in a dry and
secure location – out of the reach of
children and other unauthorized
persons.
See cutting attachment packaging for
sharpening instructions.
To Next Page
Loading...
Need help?
General
