Why is the starter rope hard to pull on my Stihl FS 410 Brush Cutter?
If the starter rope is difficult to pull or rewinds very slowly, the starter mechanism may be very dirty. Thoroughly clean the complete starter mechanism.
What causes a Stihl FS 410 gearbox to run rough and stop under load?
If the gearbox runs rough and stops running under load, the drive shaft may not fully engage. Push the gearbox onto the drive tube drive pinion assembly until the drive shaft fully engages the drive pinion.
Why is my Stihl Brush Cutter making loud noises?
Loud noises could be caused by stretched tension springs. Replace all tension springs. Alternatively, the ball bearings may be damaged or worn, in which case you should replace the ball bearings on the drive side and non-drive side.
Why is the gearbox on my Stihl FS 410 becoming too hot?
If the gearbox becomes too hot, it may be due to excessive friction caused by damaged or worn ball bearings. Replace the ball bearings on the drive side and non-drive side. You may also need to add gear lubricant.
Why does the drive tube assembly on my Stihl FS 410 get very warm?
If the drive tube assembly becomes very warm, the drive shaft may not be sufficiently lubricated. Lubricate the drive shaft along its entire length, ensuring the entire length of the flexible liner is lubricated.
Why is my Stihl FS 410 drive tube assembly vibrating?
If the drive tube assembly vibrates, the flexible liner may be worn, causing the drive shaft to be insufficiently supported. Replace the flexible liner.
Why doesn't the bike handle clamp on my Stihl FS 410 Brush Cutter?
If the bike handle does not clamp, the clamps may be greasy or oily. Clean the clamps and bike handle.
Why can't I adjust the bike handle on my Stihl FS 410 anymore?
If the bike handle can no longer be adjusted, the clamps may be dirty. Clean the clamps and bike handle.
How to stop the cutting attachment rotating at idle on my Stihl FS 410 Brush Cutter?
If the cutting attachment rotates at idle, the idle speed may be too high. Readjust the idle speed screw LA. If that doesn't resolve the issue, further diagnosis may be needed.
How to fix faulty tank vent on Stihl Brush Cutter?
Replace the tank vent.
General| Fuel Tank Capacity | 0.75 L |
|---|---|
| Shaft Type | Straight |
| Engine Power | 2.0 kW |
| Displacement | 41.6 cc |
| Overall Length | 180 cm |
Guidance on using the manual, including applicable documents and symbol meanings.
Identification and description of the main parts of the STIHL brushcutter.
Illustrations and descriptions of various deflectors and cutting attachments.
Understanding warning signs, symbols on the trimmer, and their meanings for safety.
Specifies the intended applications and necessary qualifications for the operator.
Guidelines for operator health, supervision, and essential personal protective equipment (PPE).
Ensuring a safe working environment free from bystanders and hazards.
Criteria to ensure the brushcutter is in a safe, operational condition.
Ensuring components like deflectors, mowing heads, and cutting attachments are safe and correctly installed.
Guidelines for safe fuel handling, refueling, and general operation safety.
Understanding kickback and reactive forces for safe operation.
Steps for preparing the brushcutter, and guidelines for transport and storage.
Procedures for cleaning, routine maintenance, and repairs.
Instructions for mounting the bike handle, deflector, and limit stop.
How to attach and detach the skirt for the deflector.
Instructions for mounting mowing heads and metal cutting attachments like blades and knives.
Procedures for attaching shredder blades and circular saw blades.
Instructions for safely removing metal cutting attachments.
Steps to adjust the harness, bike handle, and balance the brushcutter for user comfort.
Instructions for preparing the correct fuel mixture and refueling the brushcutter.
Detailed steps for safely starting the brushcutter engine.
Procedure for stopping the engine and verifying control functionality.
Adjusting the carburetor for winter operating conditions.
Adjusting for summer conditions and proper grip for control.
Methods for mowing, thinning, and sawing with different attachments.
Steps after work: cleaning, safe transport, and storage guidelines.
Instructions for cleaning the trimmer, deflector, and cutting attachment.
Scheduled maintenance tasks including lubrication and part replacement.
Guidance on sharpening, balancing, and general repair information.
Common problems, solutions, and air filter replacement procedure.
Procedures for spark plug maintenance and idle speed adjustment.
Technical details for FS 410/460 models, including sound and vibration values.
Information on REACH, emissions, and approved cutting attachment combinations.
Details on spare parts, disposal, and the EC Declaration of Conformity.
Official declaration of conformity with UK regulations for the brushcutter models.
To Next Page
