Need help?Do you have a question about the Stihl FS 450 and is the answer not in the manual?
General| Engine Power | 2.1 kW |
|---|---|
| Engine Type | 2-stroke |
| Fuel Tank Volume | 0.67 L |
| Sound Pressure Level | 101 dB(A) |
| Shaft Type | Straight |
| Displacement | 44.3 cm³ |
| Cutting Attachment | Metal blade |
| Cutting Diameter | 480 mm |
Recommends appropriate protective clothing and equipment for safe operation.
Checks to ensure the power tool is assembled, in good condition, and safe to operate.
Emphasizes maintaining good balance and footing during operation.
General advice on servicing and using authorized dealers for repairs.
Explains the risk of kickout when using metal cutting attachments and how to avoid it.
Explains kickout risk specific to circular saw blades and safe usage areas.
Details approved combinations of cutting attachments, deflectors, and harnesses.
General instructions for mounting cutting attachments.
Engine requires a mixture of gasoline and engine oil.
Requirements for gasoline, engine oil, and correct mix ratio.
Instructions on how to safely fill the fuel tank without spilling.
Step-by-step guide to starting the engine.
Detailed instructions on how to crank the engine to start it.
Instructions on how to properly shut off the engine.
Detailed table of maintenance tasks and their intervals for the machine.
Technical specifications for the STIHL single cylinder two-stroke engine.
Specific technical data for the FS 400 model.
Specific technical data for the FS 450 model.
To Next Page
