What to do if Stihl FSA 45 Trimmer is not being charged?
If your Stihl Trimmer is not being charged, the integrated battery might be too hot or too cold. Allow the trimmer to warm up or cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C). Operate the charger only in enclosed, dry rooms at ambient temperatures of 32 °F to 104 °F (0 °C to 40 °C).
Why Stihl FSA 45 runtime is too short?
A short runtime on your Stihl Trimmer can occur for several reasons. The trimmer may not be fully charged, so ensure you charge it fully. The integrated battery might be too hot or too cold; allow the trimmer to warm up or cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C). Also, the useful life of the integrated battery may have been reached or exceeded, in which case you should have the trimmer checked by an authorized STIHL servicing dealer.
How to fix a Stihl FSA 45 Trimmer that is not charging?
If your Stihl Trimmer is not being charged, it could be because the trimmer is too hot. Remove the activation key and allow the trimmer to cool down. Another possible cause is a malfunction in the trimmer or charging cable. Remove the activation key and contact your STIHL servicing dealer.
How to fix Stihl FSA 45 when it is not being charged?
If your Stihl Trimmer is not charging, it might be too hot. Remove the activation key and allow it to cool down. If that doesn't work, there may be a malfunction in the trimmer or charging cable, in which case you should remove the activation key and contact a STIHL servicing dealer for assistance.
Why Stihl Trimmer does not start?
Your Stihl Trimmer might not start due to several reasons. It could be because the trimmer has a low charge, so you should recharge it. Another reason might be that the trimmer is too hot, in which case you should remove the activation key and allow it to cool down. There could also be an electrical malfunction, so remove the activation key and contact your STIHL dealer. Finally, the trimmer may be damp, so allow it to dry completely.
Why is the runtime of my Stihl Trimmer so short?
A short runtime on your Stihl Trimmer could be due to a couple of things. First, make sure the trimmer is fully charged. If it is, the normal life of the trimmer might be exceeded, and it may be time to replace it.
Why is the Stihl FSA 45 runtime too short?
A short runtime on your Stihl Trimmer could be because it is not fully charged, so fully charge the trimmer. Alternatively, it could be that the normal trimmer life has been exceeded, meaning you should replace the trimmer.
Why does my Stihl Trimmer battery die so fast?
If your Stihl Trimmer runtime is too short, it could be because the trimmer is not fully charged. Fully charge the trimmer. It could also be that the normal trimmer life has been exceeded, in which case you should replace the trimmer.
Why is the Stihl Trimmer runtime so short?
A short runtime on your Stihl Trimmer can occur if the trimmer is not fully charged; ensure you fully charge it. Alternatively, the normal life of the trimmer may have been exceeded, suggesting it's time to replace the trimmer.
Why my Stihl Trimmer does not start?
If your Stihl Trimmer doesn't start when switched on, it could be due to several reasons. First, the trimmer may have a low charge, in which case you should recharge it. Another possibility is that the trimmer is too hot; remove the activation key and allow it to cool down. Additionally, an electrical malfunction could be the cause; in this case, remove the activation key and contact your STIHL dealer for assistance. Finally, if the trimmer is damp, allow it to dry completely before attempting to use it again.
Explains safety symbols found on the trimmer and charger for safe operation.
Comprehensive safety guidelines for operating the STIHL FSA 45 trimmer.
Operator's condition, responsibilities, and required PPE for safe use.
Safety measures for the trimmer, integrated battery, and charging process.
Pre-operation checks, assembly steps, and safe handling of the trimmer.
Techniques for safe operation, grip, control, and suitable working environments.
Safe operating procedures, including dealing with thrown objects and flywheel effect.
General| Type | Brush cutter |
|---|---|
| Head type | Blade |
| Telescopic | Yes |
| Handle type | D-loop handle |
| Product color | Black, Metallic, Orange |
| Uncertainty K | 2 m/s² |
| Sound power level | 87 dB |
| Vibration emission | 4.9 m/s² |
| Sound pressure level | 77 dB |
| Cutting diameter (max) | 250 mm |
| Power source | Battery |
Weight and Dimensions| Length | 1100 mm |
|---|---|
| Weight | 2300 g |
To Next Page
