Stihl FSA 85 - Replacing Nylon Line; Mounting the Mowing Head

FSA 65, FSA 85
English
43
N Hold the mowing head steady.
N Rotate the spool counterclockwise
until the shortest line is about
10 cm.
N If necessary, cut the longer line to a
length of about 10 cm.
The mowing head is now full.
Mounting the Mowing Head
N Slip the mowing head (6) over the
shaft (7) and engage hex recess (8)
on the external hexagon (9).
N Turn the spool (2) clockwise until
the two arrow heads line up –
secure the spool in this position.
N Insert the cap (1) in the spool (2),
press it down as far as stop and turn
it clockwise at the same time.
N Turn the cap (1) as far as stop and
tighten it down by hand.
3905BA020 KN
8
6
9
3905BA021 KN
7
1
2
3905BA022 KN