HS 46, HS 46 C, HS 56 C
English
25
This spark ignition system meets all
requrements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Cutting blades
HS 46
HS 46 C
HS 56 C
Weight
complete with cutting attachment, dry
HS 46
HS 46 C
HS 56 C
– Safety glasses
– Blade scabbard
– Tip guard
– STIHL resin solvent
– Combination wrench
Contact your STIHL dealer for more
information on these and other special
accessories.
Fuel tank capacity: 0.28 l
Bidirectional, ground on one side
Sharpening angle: 35°
Tooth spacing: 30 mm
Stroke rate: 3,600/min
Cutting length: 450 mm
Bidirectional, ground on one side
Sharpening angle: 35°
Tooth spacing: 30 mm
Stroke rate: 3,600/min
Cutting length: 550 mm
Bidirectional, ground on both sides
Sharpening angle: 45°
Tooth spacing: 34 mm
Stroke rate: 3,600/min
Cutting length: 600 mm
450 mm blade: 4.0 kg
550 mm blade: 4.3 kg
600 mm blade: 4.5 kg
Special Accessories
To Next Page
Loading...
