Stihl HS 82 R - Minimize Wear and Avoid Damage

The following intervals apply for normal operating
conditions. The specified intervals must be short‐
ened accordingly when working for longer than nor‐
mal or under difficult cutting conditions (extensive
dust, etc.).
Before starting work
At the end of work and/or daily
Whenever tank is refilled
Weekly
Monthly
Annually
If faulty
If damaged
As required
Intake port for cooling air Visual inspection X
Clean X
Spark arresting screen in
muffler
Check if installed X
Check or replace
1)
X
All accessible screws,
nuts and bolts (not
adjusting screws)
Tighten X
Anti-vibration elements Visual inspection X
Have replaced by serv‐
icing dealer
1)
X X
Cutting blades Clean X
sharpen X
Visual inspection X
Have replaced by serv‐
icing dealer
1)
X
adjust adjustable blade
clearance
2)
X
Gearbox lubrication check and replenish
after every 25 hours of
operation
Safety information label replace X
1)STIHL recommends STIHL dealers2)not in all versions, market-specific or available as special
accessory
16 Minimize Wear and Avoid
Damage
Observing the instructions in this manual helps
reduce the risk of unnecessary wear and dam‐
age to the power tool.
The power tool must be operated, maintained
and stored with the due care and attention
described in this owner's manual.
The user is responsible for all damage caused by
non-observance of the safety precautions, oper‐
ating and maintenance instructions in this man‐
ual. This includes in particular:
–
Alterations or modifications to the product not
approved by STIHL.
–
Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
–
Using the product for purposes for which it
was not designed.
–
Using the product for sports or competitive
events.
–
Consequential damage caused by continuing
to use the product with defective components.
16.1 Maintenance Work
All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
English 16 Minimize Wear and Avoid Damage
18 0458-448-8321-C