Stihl HSE 71 Instruction Manual

HSE 61, HSE 71, HSE 81
English
12
Maintenance and Care
The following intervals apply for normal operating conditions. The specified intervals must
be shortened accordingly when working for longer than normal or under difficult cutting
conditions (extensive dust, etc.).
Before starting work At the end of work and/or daily Weekly Monthly Annually If faulty If damaged As required
Complete machine
Visual inspection X
Clean X
Two-hand control
Check function – the cutting blades must
quickly come to a standstill when the trig-
ger switch or switch lever, or the trigger
switch, or auxiliary switch is released
X
Cool air intake port
Visual inspection X
Clean X
Cutting blades
Visual inspection X
Clean
2)
X
sharpen
1)2)
X
Have replaced by servicing dealer
1)
X
Gear assembly and connecting rod
inspection by a specialist dealer after every
50 hours of operation
1)
Have gearbox topped up with STIHL gear
lubricant by servicing dealer
1)
X
Carbon brushes
inspection by a specialist dealer after every
100 hours of operation
1)
Have replaced by servicing dealer
1)
X
Accessible screws, nuts and bolts Tighten X
Safety information label replace X
1)
STIHL recommends STIHL dealers
2)
Afterwards spray the blades with STIHL resin solvent

Stihl HSE 71 Specifications

General

Blade size	600 mm
Blade type	Double blade
Product color	Grey, Orange, Black
Vibration emission	3.8 m/s²
Engine power	600 W
Power source	Battery
AC input voltage	230 - 240 V
Power cable length	0.31 m

Weight and Dimensions

Depth	1230 mm
Weight	- g