Stihl HSE 71

HSE 61, HSE 71, HSE 81
English
16
Vibration measurement a
hv
to
EN 60745-2-15
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration level.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
Observe measures to reduce vibration
exposure to protect the user – see
section on "Vibrations" in chapter on
"Safety Precautions and Working
Techniques".
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
HSE 71
600 mm blade: 99 dB(A)
700 mm blade: 99 dB(A)
HSE 81
500 mm blade: 99 dB(A)
600 mm blade: 99 dB(A)
700 mm blade: 99 dB(A)
HSE 61
500 mm blade:
Left handle: 5.3 m/s
2
Right handle: 3.3 m/s
2
HSE 61
600 mm blade:
Left handle: 5.3 m/s
2
Right handle: 3.3 m/s
2
HSE 71
600 mm blade:
Left handle: 3.8 m/s
2
Right handle: 2.6 m/s
2
HSE 71
700 mm blade:
Left handle: 3.8 m/s
2
Right handle: 2.6 m/s
2
HSE 81
500 mm blade:
Left handle: 3.2 m/s
2
Right handle: 2.1 m/s
2
HSE 81
600 mm blade:
Left handle: 3.5 m/s
2
Right handle: 2.5 m/s
2
HSE 81
700 mm blade:
Left handle: 3.5 m/s
2
Right handle: 2.5 m/s
2