27KM 85, KM 85 R
english / USA
: Fit the starter cover.
To do this, push the upper mounting
boss under the shroud –
line up the tank and push lower part
of cover onto the tank.
: Insert and tighten down the housing
screws.
Secure cable lug in position (if
fitted).
For periods of about 3 months or longer:
: Drain and clean the fuel tank in a
well ventilated area.
: Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
: Thoroughly clean the machine - pay
special attention to the cylinder fins
and the air filter.
: Remove the tool – clean and inspect
it.
: Store the machine in a dry, high or
locked location – out of the reach
of children and other unauthorized
persons.
386BA005 KN
Storing the Machine
To Next Page
Loading...
Need help?
General
