ENNO
27
SVFIDASLSKTRHUSRHRBGUKETMK
0478 403 9806 B - EN
4.8 Storage for prolonged periods
without operation
Allow the engine to cool before storing the
machine in an enclosed space.
Store the machine with empty fuel tank
and the fuel reserve in a lockable and well-
ventilated room.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Never store the machine with petrol in the
tank inside a building. The resulting petrol
fumes could come into contact with naked
flames or sparks and could be ignited.
If the tank has to be emptied (e.g.
immobilisation before the winter break),
the fuel tank must be emptied out of doors
only (empty the tank by running the
engine, for example).
Thoroughly clean the machine before
storage (e.g. winter break).
Only store the machine with the spark plug
socket disconnected.
Store the machine in good operational
condition.
Allow the machine to cool down
completely before covering it.
4.9 Disposal
Waste products such as used engine oil or
fuel, used lubricants, filters, batteries and
similar wearing parts can be harmful to
people, animals and the environment, and
must consequently be disposed of
properly.
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. STIHL
recommends STIHL specialist dealers.
Ensure that old machines are properly
disposed of. Read the information in the
"Environmental protection" section.
(Ö 14.)
5. Description of symbols
Attention!
Read the instruction man-
ual and follow the safety
instructions before initial
use.
Attention!
Beware of objects being
thrown up - keep a safe dis-
tance and keep other people
away.
Risk of injury!
Rotating tools: keep your
hands and feet away from
rotating tools. Only operate
with protective covers.
Attention!
Detach the spark plug
socket before performing
any maintenance and clean-
ing operations.
MH 445:
For safety reasons, the
release lever must be
pressed before actuation of
the self-propulsion lever.
This prevents inadvertent
actuation of the self-propul-
sion lever.
MH 445 R, MH 560,
MH 585, MH 685:
For safety reasons, the rele-
vant release lever must be
pressed before actuation of
the self-propulsion lever.
This prevents inadvertent
actuation of a self-propul-
sion lever. The black self-
propulsion lever is for the
forward gear and the red
self-propulsion lever is for
the reverse gear.
To Next Page
Loading...
