Stihl MH 445.1 - Service Schedule; Handover Confirmation; Service Confirmation

0478 403 9806 B - EN
44
Fault:
No tilling performance
Possible cause:
– No folding retainer in drive shaft
Remedy:
– Check attachment of hoes to drive shaft
(Ö 7.7), (Ö 7.8)
Fault:
Loud gearbox noise
Possible cause:
– Incorrect gearbox oil level
Remedy:
– Check gearbox oil level (#)
Fault:
Drive shaft does not rotate when self-
propulsion lever is actuated
Possible cause:
– Cable defective
– Worn drive belt
Remedy:
– Check/replace cable (#)
– Replace drive belt (#)
20.1 Handover confirmation
20.2 Service confirmation
Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
20. Service schedule
Service performed on
Next service date
32