ENNO
39
SVFIDASLSKTRHUSRHRBGUKETMK
0478 403 9802 C - EN
– Use of fuel and lubricants not approved
by STIHL (lubricants, petrol and engine
oil, see engine instruction manual).
– Product modifications not approved by
STIHL.
– The use of attaching parts, attachments
or cutting tools not approved by STIHL.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Folding retainer (hoes):
9396 021 3785
MH 445, MH 445 R
Complete hoe set, inside left:
6241 710 0200
Complete hoe set, inside right:
6241 710 0205
Complete hoe set, outside left:
6241 710 0210
Complete hoe set, outside right:
6241 710 0215
MH 560, MH 585, MH 685
Complete hoe set, inside left:
6241 710 0220
Complete hoe set, inside right:
6241 710 0225
MH 585, MH 685
Complete hoe set, outside left:
6242 710 0210
Complete hoe set, outside right:
6242 710 0215
17.1 STIHL MH 445.0, MH 445.0 R,
MH 560.0, MH 585.0, MH 685.0 Tiller
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: tiller
– manufacturer's brand: STIHL
– type: MH 445.0, MH 445.0 R,
MH 560.0, MH 585.0, MH 685.0
– serial number: 6241
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN 709 and EN 14982
(where applicable).
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
D-90431 Nuremberg
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix VIII.
MH 445.0, MH 445.0 R
– Measured sound power level: 92 dB(A)
– Guaranteed sound power level:
93 dB(A)
16. Standard spare parts
17. EU - Declaration of
conformity
To Next Page
Loading...
