Stihl MS 150 C User Manual

MS 150 C
English
24
Chain scabbard
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If you use guide bars of different lengths
on the saw, the length of the chain
scabbard must be matched to the guide
bar to help reduce the risk of injury. It
should cover the full length of the guide
bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
Disengaging the Chain Brake
N Pull the hand guard towards the
front handle until there is an audible
click – the chain brake is
disengaged.
Removing the chain sprocket cover
N Unscrew the nut (1) and remove the
sprocket cover (2).
Mounting the guide bar
N Turn the screw (1)
counterclockwise until the tensioner
slide (2) butts against the left end of
the housing slot.
N Fit the guide bar over the stud (3)
and engage the peg of the tensioner
slide in the hole (4).
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
001BA244 KN
Mounting the Bar and Chain
2011BA001 KN
1
2011BA050 KN
2
2011BA051 KN
1
2
4
3
2011BA052 KN

Stihl MS 150 C Specifications

General

Brand	Stihl
Model	MS 150 C
Category	Chainsaw
Language	English