To Next PageTo Next Page
Need help?Do you have a question about the Stihl MS 150 C and is the answer not in the manual?
General| Engine displacement | 23.6 cm³ |
|---|---|
| Weight (without cutting equipment) | 2.6 kg |
| Weight | 3.1 kg |
| Bar length | 30 cm |
| Powerhead Weight | 2.6 kg |
| Chain pitch | 1/4" |
| Chain oil tank volume | 0.12 l |
| Recommended bar length | 30 cm |
Essential safety measures and operational techniques for safe chainsaw use.
Information on saw chain, guide bar, and sprocket compatibility.
Step-by-step instructions for attaching the guide bar and chain.
Procedure for adjusting saw chain tension correctly.
How to verify correct chain tension.
Information on fuel requirements and safe fueling procedures.
Details on chain lubricant and filling the oil tank.
Explanation of the chain brake function, engagement, and release.
Instructions for starting, stopping, and controlling the engine.
General guidelines and warnings for operating the chainsaw.
Maintenance and care procedures for the guide bar.
Procedure for cleaning the air filter to maintain engine performance.
Detailed steps for adjusting the carburetor settings.
How to adjust the engine's idle speed correctly.
Inspection, removal, installation, and maintenance of the spark plug.
Procedures for replacing the starter rope and rewind spring.
Instructions for storing the chainsaw for short and long terms.
Guide to maintaining and sharpening the saw chain for optimal performance.
Comprehensive schedule of maintenance tasks and intervals.
Illustration and identification of the chainsaw's main components.
Definitions of terms used throughout the manual.
Detailed technical specifications of the chainsaw model.
Information regarding available special accessories for the product.
Instructions for ordering replacement parts for the chainsaw.
Guidelines for performing maintenance and repairs on the chainsaw.
Instructions for the proper and environmentally friendly disposal of the product.
Warranty statement regarding federal emission control systems.
California-specific warranty statement for emission control systems.
List of STIHL registered and common law trademarks.
Requirements and considerations for the chainsaw operator.
Physical and mental health requirements for safe operation.
Understanding and preventing reactive forces like kickback.
Recommended protective apparel and footwear for safe operation.
General information and warnings about the power tool itself.
Guidelines for the safe operation of the chainsaw.
Details on the fuel cap's operation and troubleshooting.
Essential checks to perform before starting the chainsaw.
Step-by-step instructions for starting the chainsaw.
Key adjustments for optimal and safe chainsaw operation.
Guidelines and precautions for operating the chainsaw.
Precautions to avoid cuts from the cutting tool.
Importance of maintaining proper footing and balance.
Safety advice for operating in adverse weather and terrain.
Guidelines for safe working conditions and environment.
General instructions for operating the chainsaw safely.
Understanding and managing reactive forces and kickback hazards.
Compliance requirements related to chainsaw kickback standards.
Devices and techniques to reduce the risk of kickback injury.
Information on chains and bars designed to reduce kickback.
Prohibition and warnings regarding the use of bow guides.
Methods and practices to avoid kickback situations.
Methods for felling, limbing, and bucking trees.
Detailed instructions and precautions for felling trees.
Procedures and safety advice for removing branches from a fallen tree.
Instructions and safety advice for cutting logs into sections.
Techniques for safely cutting logs that are under tension.
Guidelines for maintaining, repairing, and storing the chainsaw.
Importance of using only genuine STIHL replacement parts.
Warning against performing unauthorized repair work.
Importance of maintaining the chain brake for safety.
Ensuring compatibility of cutting attachments with the chainsaw.
Information on the chain scabbard and its proper use.
Step-by-step instructions for attaching the guide bar and chain.
Procedure for adjusting saw chain tension correctly.
Detailed information on fuel type, mix ratio, and ethanol content.
Step-by-step instructions for safely refueling the chainsaw.
Details on opening, closing, and troubleshooting the fuel cap.
Information on recommended chain lubricants and their importance.
Step-by-step guide for filling the chain oil tank.
How to check if the chain is properly lubricated.
Explanation of how the chain brake functions and is engaged.
Procedure for releasing the chain brake.
Recommended maintenance intervals for the chain brake.
Procedures for starting, stopping, and controlling the engine.
Methods for holding the chainsaw correctly during starting.
Step-by-step guide for starting the chainsaw.
Troubleshooting steps if the engine fails to start.
General instructions for operating the chainsaw during use.
Instructions for storing the chainsaw for short periods.
Instructions for storing the chainsaw for extended periods.
Maintenance and care procedures for the guide bar.
Procedure for cleaning the air filter.
Detailed steps for adjusting the carburetor settings.
Adjustments needed for operating the chainsaw at high altitudes.
Spark plug inspection, removal, installation, and maintenance.
Procedures for replacing the starter rope and rewind spring.
Steps for installing the rope rotor.
Procedure for replacing a broken rewind spring.
How to check the chain sprocket for wear.
Guide to maintaining and sharpening the saw chain.
Correct sharpening and side plate angles for chainsaw chains.
Instructions for using a file holder for chain sharpening.
Correct techniques for sharpening the chainsaw chain.
Importance and adjustment of the depth gauge.
Procedure for lowering depth gauges during sharpening.
List of special tools required for chain sharpening.
Comprehensive schedule of maintenance tasks and intervals.
Detailed technical specifications of the chainsaw model.
Specifications for approved cutting attachments.
Information regarding available special accessories for the product.
Instructions for ordering replacement parts.
Guidelines for performing maintenance and repairs.
Warranty statement regarding federal emission control systems.
California-specific warranty statement for emission control systems.
Limitations of the emission control system warranty coverage.
Explanation of reactive forces and their potential impact.
Detailed explanation of kickback phenomena and causes.
Compliance requirements related to chainsaw kickback standards.
Devices and techniques to reduce the risk of kickback injury.
Information on chains and bars designed to reduce kickback.
Prohibition and warnings regarding the use of bow guides.
Methods and practices to avoid kickback situations.
Caution for cutting small brush and saplings due to entanglement risk.
Steps to prevent pull-in during chainsaw operation.
Steps to prevent pushback during chainsaw operation.
Detailed instructions and precautions for felling trees.
Procedures and safety advice for removing branches from a fallen tree.
Instructions and safety advice for cutting logs into sections.
Techniques for safely cutting logs that are under tension.
Importance of maintaining the chain brake for safety.
Warning about running the saw with the chain brake engaged.
Risks associated with using mismatched cutting components.
Recommended maintenance intervals for the chain brake.
How the chain brake is activated by inertia.
Procedure for checking the chain brake's operation.
Troubleshooting steps if the engine fails to start.
Warning against leaning fuel mixture for power.
Rule for opening the throttle in relation to chain brake status.
Importance of regularly checking and adjusting chain tension.
Correct chain tension at different temperatures.
Procedure for cooling the engine after prolonged high throttle use.
Actions to take after finishing work, including chain tension.
Releasing chain tension after finishing work to prevent damage.
Maintenance and care procedures for the guide bar.
Procedure for cleaning the air filter.
Detailed steps for adjusting the carburetor settings.
How to adjust the engine's idle speed correctly.
Spark plug inspection, removal, installation, and maintenance.
Procedures for replacing the starter rope and rewind spring.
Steps for installing the rope rotor.
Procedure for replacing a broken rewind spring.
How to check the chain sprocket for wear.
Guide to maintaining and sharpening the saw chain.
Correct sharpening and side plate angles for chainsaw chains.
Instructions for using a file holder for chain sharpening.
Correct techniques for sharpening the chainsaw chain.
Procedure for lowering depth gauges during sharpening.
List of special tools required for chain sharpening.
Comprehensive schedule of maintenance tasks and intervals.
Specifications for approved cutting attachments.
Information regarding available special accessories for the product.
Instructions for ordering replacement parts.
Guidelines for performing maintenance and repairs.
Limitations of the emission control system warranty coverage.
Ensuring compatibility of chain, sprocket, and guide bar.
Matching drive link gauge to bar groove width.
Risks associated with using mismatched cutting components.
Information on different chain pitches.
Correct sharpening and side plate angles for chainsaw chains.
Instructions for using a file holder for chain sharpening.
Correct techniques for sharpening the chainsaw chain.
Importance and adjustment of the depth gauge.
Procedure for lowering depth gauges during sharpening.
List of special tools required for chain sharpening.
How to check the chain sprocket for wear.
When and how to replace the chain sprocket.
Detailed technical specifications of the chainsaw model.
Approved cutting attachments for kickback compliance.
Notes on ANSI standards and low kickback chains.
Specifications for Rollomatic E Mini guide bars.
Specifications for 1/4" P saw chains.
Specifications for chain sprockets.
Instructions for the proper and environmentally friendly disposal of the product.
Warranty statement regarding federal emission control systems.
California-specific warranty statement for emission control systems.
Owner's rights and responsibilities under the warranty.
Details of the manufacturer's warranty coverage.
Owner's responsibilities for maintaining warranty coverage.
Explanation of the warranty period for different parts.
Procedures for warranty diagnostics and testing.
How warranty repairs are performed by authorized dealers.
Where to submit warranty claims and required documentation.
Maintenance requirements necessary to uphold warranty coverage.
Limitations of the emission control system warranty coverage.
