Stihl MS 250C User Manual

MS 250
English
60
– Clamps
– Fasteners
Where to Make a Claim for Warranty
Service
Bring the product to any authorized
STIHL servicing dealer.
Maintenance Requirements
The maintenance instructions in this
manual are based on the application of
the recommended 2-stroke fuel-oil
mixture (see also instruction "Fuel").
Deviations from this recommendation
regarding quality and mixing ratio of fuel
and oil may require shorter maintenance
intervals.
Limitations
This Emission Control Systems
Warranty shall not cover any of the
following:
N repair or replacement required
because of misuse, neglect or lack
of required maintenance,
N repairs improperly performed or
replacements not conforming to
STIHL Incorporated specifications
that adversely affect performance
and/or durability, and alterations or
modifications not recommended or
approved in writing by STIHL
Incorporated,
and
N replacement of parts and other
services and adjustments
necessary for required maintenance
at and after the first scheduled
replacement point.
STIHL Registered Trademarks
STIHL
®
{
K
The color combination orange-grey
(U.S. Registrations #2,821,860;
#3,010,057, #3,010,058, #3,400,477;
and #3,400,476)
AutoCut
®
FARM BOSS
®
iCademy
®
MAGNUM
®
MasterWrench Service
®
MotoMix
®
OILOMATIC
®
Trademarks

Stihl MS 250C Specifications

General

Engine Power	2.3 kW
Displacement	45.4 cm³
Guide Bar Length	40 cm
Power output	2.3 kW (3.1 hp)
Chain pitch	3/8"