80 MS 290, MS 310, MS 390
No. Part Name Part No. Application Rem.
30 Crimping tool 5910 890 8210 Attaching connectors to electrical wires
31 Puller 5910 890 4500 Removing limiter cap
32 Socket, 13 mm, DIN 3124 5910 893 5608 Flywheel nut
33 Socket, 19 mm, DIN 3124 5910 893 5613 Clutch
34 Screwdriver bit T 27 x 125 0812 542 2104 Removing and installing spline socket
head screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench
35 T-handle screwdriver, T 27 x 150 5910 890 2400 IS-P screws (4 mm) 1)
Remarks:
1) Use for releasing P screws only.
To Next Page
Loading...
Need help?
General
